Design and Evaluation of a Mercury (II) Optode Based on Immobilization of 1-(2-Pyridylazo)-2-Naphthol on a Triacetylcellulose Membrane and Determination in Various Samples
More details
Hide details
Payame Noor University PNU, Shiraz, 71365-944, Iran
Online publication date: 2008-11-01
Publication date: 2008-11-01
Eurasian J Anal Chem 2008;3(3):284–297
The characterization of an optical sensor membrane is described for the determination of Hg2+ ions based on the immobilization of 1-(2-pyridylazo)-2-naphthol (PAN) on a triacetylcellulose membrane. The membrane responds to mercury ions by changing color reversibly from orange to red in universal buffer solution at pH 6. Under optimum conditions, the proposed membrane displayed a linear range of 0.1-24 μg mL-1 with a limit of detection of, 0.02 μg mL-1 at a wavelength of 558 nm. The response time of the optode was about 10-12 min, depending on the concentration of mercury (II) ions. The coefficients of variation (CV) of the sensor response for, 1.0 μg mL-1 of Hg (II) was, 1.8% and the CV between seven membranes was 2.3%. The sensor can readily be regenerated with the ethylene diamine solution. The optode is fully reversible and the selectivity of optode to Hg2+ ions in universal buffer is relatively good with Co2+ and Ni2+ ions as interferences. The proposed optode was applied successfully for the determination of mercury (II) in various samples.
Green N N, Earnshaw A (1984) Chemistry of Elements, PergamonPress: NewYork.
Marezenko P (1986) Separation and Spectrophotometric Determination of elements, Ellis Hor wood: Chichester.
Montuori P, Jover E and Pagano A (2007) Improvements on a total mercury determination absorption spectrophotometry detection method in human hair using graphite-furnace atomic . J Prev Med Hyg 48:43.
Zho X P, Alexandratos S D (2007) Determination of trace levels of mercury in aqueous solutions by inductively coupled plasma atomic emission spectrometry. Micro. Chem 86: 37.
Wang M, Feng W Y and Shi J W (2007) Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC-ICP-MS. Talanta 71:2034.
Aranda P R, Gil R A, Moyana S, Devito I E and Martinez L D (2007) Cloud point extraction of mercury with Ponpe 7.5 prior to its determination in biologic all samples by ETAAS. Talanta 75:307.
Okcu F, Ertas H, Ertas F N (2007) Determination of mercury in table salt samples by on-line medium exchange anodic stripping voltammetry. Talanta75:442.
Bennun L, Gomez J (1997) Determination of mercury by total-reflection X-ray fluorescence using amalgamation with gold. Spectrochim. Acta5213:1195.
Powell M. J, Quan E. S. K, Boomer D. W and Wiederin D. R (1992) Inductively coupled plasma mass-spectrometry with direct injection nebulization for mercury analysis of drinking-water . Anal. Chem. 64: 2233.
Burrini C, Cagnigni A (1997) Determination of mercury in urine by ET-AAS using complexation with dithizone and extraction with cyclohexane. Talanta 44: 1219.
Safawi A, Eddon L, Foulkes M, Stockwell P and Cornes W (1999) Determination of total mercury in hydrocarbons and natural gas condensate by atomic fluorescence spectrometry. Analyst 124:185.
Yamini Y, Alizadeh N, Shamsipour M (1997) Solid phase extraction and determination of ultra trace amounts of mercury (II) using octadecyl silica membrane disks modified by hexathia-18-crown-6-tetraone and cold vapour atomic absorption spectrometry.Anal . Chim . Acta 355:69.
Clark A, Kopelman R, Tjalkens R and Philbert M A (1999) Optical nanosensors for chemical analysis inside single living cells. 2: sensors for pH and Calcium and the intracellular application of pebble sensors. Anal. Chem. 71 : 4837.
Afkhami A, Sarlak N (2007) Design and characteristics of a sulfide and sulfite optode based on immobilization of methyl violet on a triacetylcellulose membrane. Sens . Acuators B Chemical 124:285.
Simon W (1990) Technology andapplication of chemical sensors and biosensors-Quo-Vadis. Chimia 44:395.
Seitz W R (1998) Chemical sensors based on immobilized indicators and fiber optics, CRC Crit. Rev. Anal. Chem 19:135.
Chau L K, Porter M D (1990) Optical sensor for calcium –performance, structure, and reactivity of calcichrome immobilized at an anionic polymer film. Anal. Chem 62: 1964.
Japanese Industrial standard, JISK 0102, 1993.
Safavi A, Bagheri M (2004) Design and characteristics of a mercury (II) optode based on immobilization of dithizone on a triacetylcellulose membrane. Sens. Actuators B 90 : 143.
Alizadeh N, Moemeni A and Shamsipour M (2002) Poly(vinyl chloride)-membrane ionselective bulk optode based on 1,10-dibenzyle-1,10-diaza-18-crown-6 and 1-(2-pyridylazo)-2-naphthol for Cu2+and Pb2+ ions. Anal Chem 464: 187.
Jones T P, Porter M D (1988) Optical pH sensor based on the chemical modification of a porous polymer film . Anal. Chem 60:404.
Lurie J (1978) Handbook of Analytical Chemistry, English translated by: N. Bobrov, Moscow.
Safavi A, Bagheri M (2005) Design of a copper (II) optode based on immobilization of dithizone on a triacetylcellulose membrane. Sens. Actuators 107:53.
Safavi A, Sadeghi M (2007) A PVC-membrane bulk optode for gallium (III) ion determination. Talanta 71:339.
Sanchez- Pedreno C, Ortuno J A, Albero M I, Garcia M S and Valero M V (2000) Development of a new bulk optode membrane for the determination of mercury(II). Anal. Chem. Acta 414:195.
Kusvandi B, Narayanaswamy R (2001) Selective pool optode for mercury ion sensing in aqueous solution. Sens.Actuators B 74: 131.