Preconcentration of Nickel Using Chemically Modified Silica Nanoparticles
Anupreet Kaur 1,   Usha Gupta 1  
More details
Hide details
Department of Chemistry, Punjabi University Patiala, Punjab, India
Usha Gupta   

Department of Chemistry, Punjabi University Patiala, Punjab, India
Publication date: 2017-10-06
Eurasian J Anal Chem 2009;4(2):175–183
A procedure has been developed for the preconcentration of trace amounts of Ni(II) in different samples using 1-(2-pyridylazo)-2-naphthol modified SiO2 nanoparticles as solid-phase extractant. Various parameters such as preconcentration factor, effect of pH, sample volume, shaking time, elution conditions and effects of interfering ions for the recovery of analyte have been optimized. The adsorption capacity of nanometer SiO2-PAN has been found to be 42.81µmol/g at optimum pH. The detection limit (3σ) has been found to be 0.43µg/L. The extractant showed rapid kinetic sorption. The adsorption equilibrium of Ni(II) on nanometer SiO2-PAN was achieved within 10mins. Adsorbed Ni(II) was easily eluted with 5mL of 6M hydrochloric acid. The maximum preconcentration factor has been found to be 60. The method has been applied for the determination of trace amounts of Ni(II) in different samples.
Bilba D, Bejan D, Tofan L (1998) Chelating sorbents in inorganic chemical analysis. Croat. Chem. Acta. 71: 155.
Camel V (2003) Solid phase extraction of trace elements. Spectrochim Acta Part B 58: 1177.
Stevens J B (1991) Disposition of toxic metals in the agricultural food chain: steadystate bovine milk biotransfer factors. Environ Sci Technol 25:1289.
Romero L C, Bonomo A, Gonzo E E (2004) Peanut shell activated carbon: adsorption capacities for copper(II), zinc(II), nickel(II) and chromium(VI) ions from aqueous solutions. Adsorpt Sci Technol 22:237.
Baytak S, Türker A (2006) Determination of lead and nickel in environmental samples by flame atomic absorption spectrometry after column solid-phase extraction on Ambersorb-572 with EDTA. J Hazard Mater 129:130.
Liu LE, Ding L, Qi M, Han XL, Zhang HQ (2007) Determination of trace elementsin new food sources by flame atomic absorption spectrophotometry. Spectrosc Spect Anal 27:1436.
Pereira M D, Arruda M A Z (2003) Trends in preconcentration procedures for metal determination using atomic spectrometry techniques. Microchim Acta 141:115.
Ghiasvand AR, Ghaderi R, Kakanejadifard A (2004) Selective preconcentration of ultra trace copper(II) using octadecyl silica membrane disks modified by a recently synthesized glyoxime derivative. Talanta 62:287.
Jal P K, Patel S, Mishra B K (2004) Chemical modification of silica surface by immobilization of functional groups for extractive concentration of metal ions. Talanta 62:1005.
Gurnani V, Singh A K, Venkataramani B (2003) Cellulose functionalizedwith 8- hydroxyquinoline: New method of synthesis and applications as a solid phase extractant in the determination of metal ions by flame atomic absorption spectrometry. Anal. Chim. Acta, 485: 221.
El-shahat M F, Moawed EA, Zaid M A A (2003) Preconcentration and separation of iron, zinc, cadmium and mercury from waste water using Nile blue a grafted polyurethane foam. Talanta, 59: 851.
Uzun A, Soylak M, Elc I L (2001) Preconcentration and separation with Amberlite XAD-4 resin; determination of Cu, Fe, Pb, Ni, Cd, and Bi at trace levels in waste water samples by flame atomic absorption spectrometry. Talanta, 54 : 197.
Nelms S M, Greenway G M, Koller D (1996) Evaluation of controlled pore glass immobilized iminodiacetate as a reagent for automated on-line matrix separation for inductively coupled plasma mass spectrometry. J Anal At Spectrom 11: 907.
Jibrin S S, Hu B, Pu X L, Huang C Z, Jiang Z C (2007) Nanometer sized zirconium dioxide microcolumn separation and preconcentration of trace metals and their determination by ICP-OES in environmental and biological samples. Microchim Acta 159:379.
Huang C Z, Jiang Z C, Hu B (2007) Mesoporous titanium dioxide as a novel solidphase extraction material for flow injection microcolumn preconcentration on-line coupled with ICP-OES determination of trace metals in environmental samples. Talanta 73:274.
Vassileva E, Proinova I, Hadjiivanov K (1996) Solid-phase extraction of heavy metal ions on a high surface area titanium dioxide (anatase). Analyst 121:607.
Ganjali M R, Babaei L H, Badiei A, Saberian K, Behbahani S, Ziarani G M, SalavatiNiasari M (2006) A novel method for fast enrichment and monitoring of hexavalent.
and trivalent chromium at the ppt level with modified silica MCM-41 and its determination by inductively coupled plasma optical emission spectrometry. Quim Nova 29: 440.
Liang P, Ding Q, Liu Y (2006) Speciation of chromium by selective separation and preconcentration of Cr(III) on an immobilized nanometer titanium dioxide microcolumn. J Sep Sci 29: 242.
Marques M J, Morales-Rubio A, Salvador A, de la Guardia M (2001) Chromium speciation using activated alumina microcolumns and sequential injection analysisflame atomic absorption spectrometry. Talanta 53: 1229.
Stober W, Fink A, Bohn E (1968) Controlled growth of monodispered Silica Spheres in the Micron Size Range. J Colloid Interface Sci 26: 62.
Toral M. I, Lara N, Narvaez J, Richter P (2004) Screening of Some Transition Metal ions and quantitative determination of copper, cadmium and zinc by solid phase derivative spectrophotometry. J Chil Soc, 49, 163.