A Review Of The Environmental Impact Of Cutting Fluids Used For Manufacturing And Pharma Industries
DOI:
https://doi.org/10.53555/ejac.v13i1.1160Keywords:
Bio oils, MQL, Eco-friendly oils, Cutting fluids, Coolant oil, Machining oilAbstract
In the era of sustainability, all manufacturing industries, including pharmaceutical, should be responsible for reducing environmental pollution. Thus, Plant-based oils are set to play a crucial role in the lubricant and cutting fluid industries due to their renewable, natural, non-toxic, and environmentally friendly nature. Additionally, they are more cost-effective compared to synthetic alternatives. Unlike mineral oils, plant oils possess unique chemical structures that give them distinct properties. They offer superior lubrication, higher viscosity indices, and excellent anticorrosion characteristics, mainly because of their strong affinity for metal surfaces in this study. Recent research highlights the promising potential of manufacturing and pharma industries in terms of lubrication and cooling during machining, thus reducing the hazards to the operator. The oils used for the machining are also highlighted.
References
John S. Agapiou. Performance Evaluation of Cutting Fluids with Carbon NanoOnions as Lubricant Additives, Procedia Manufacturing 26 (2018) 1429–1440. https://doi.org/10.1016/j.promfg.2018.07.101
Hegab, H.., Umer, U.., Soliman, M.., & Kishawy, H.. (2018). Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718. The International Journal of Advanced Manufacturing Technology, 96 , 3449-3458 . http://doi.org/10.1007/S00170-018-1825-0
Hegab, H.., Hegab, H.., Kishawy, H.., Gadallah, M. H.., Umer, U.., & Deiab, I.. (2018). On machining of Ti-6Al-4V using multi-walled carbon nanotubes-based nano-fluid under minimum quantity lubrication. The International Journal of Advanced Manufacturing Technology, 97 , 1593-1603 . http://doi.org/10.1007/S00170-018-2028-4
Zeng, Qunfeng., Yu, Fei., & Dong, G.. (2013). Superlubricity behaviors of Si3N4/DLC Films under PAO oil with nano boron nitride additive lubrication. Surface and Interface Analysis , 45 . http://doi.org/10.1002/sia.5269
Rapeti, Padmini., Pasam, Vamsi Krishna., Gurram, Krishna., & Revuru, R. S.. (2018). Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing. Journal of Cleaner Production , 172 , 2862-2875 . http://doi.org/10.1016/J.JCLEPRO.2017.11.127
Wang, Baogang., Tang, Weiwei., Lu, Hongsheng., & Huang, Zhiyu. (2016). Ionic liquid capped carbon dots as a high-performance friction-reducing and antiwear additive for poly(ethylene glycol). Journal of Materials Chemistry , 4 , 7257-7265 . http://doi.org/10.1039/C6TA01098A
Singh, R.., Sharma, A.., Dixit, A.., Tiwari, A.., Pramanik, A.., & Mandal, A.. (2017). Performance Evaluation of Alumina-graphene Hybrid Nano-cutting Fluid in Hard Turning. Journal of Cleaner Production , 162 , 830-845 . http://doi.org/10.1016/J.JCLEPRO.2017.06.104
Hegab, H.., Umer, U.., Deiab, I.., & Kishawy, H.. (2018). Performance evaluation of Ti–6Al–4V machining using nano-cutting fluids under minimum quantity lubrication. The International Journal of Advanced Manufacturing Technology , 95 , 4229-4241 . http://doi.org/10.1007/S00170-017-1527-Z
Tang, Lizhi., Zhang, Yanbin., Li, Changhe., Zhou, Zongming., Nie, Xiaolin., Chen, Yun., Cao, Huajun., Liu, Bo., Zhang, N.., Said, Z.., Debnath, S.., Jamil, M.., Ali, H. M.., & Sharma, Shubham. (2022). Biological Stability of Water-Based Cutting Fluids: Progress and Application. Chinese Journal of Mechanical Engineering , 35 , 1-24 . http://doi.org/10.1186/s10033-021-00667-z
Kumar, Harmesh. (2015). Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM). The International Journal of Advanced Manufacturing Technology , 76 , 105-113 . http://doi.org/10.1007/S00170-014-5965-6
Su, Yu., Gong, L.., Li, Bi., Liu, Zhiqiang., & Chen, D.. (2016). Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning. The International Journal of Advanced Manufacturing Technology , 83 , 2083-2089 . http://doi.org/10.1007/S00170-015-7730-X
Meng, Y.., Su, Fenghua., & Chen, Yangzhi. (2017). Au/Graphene Oxide Nanocomposite Synthesized in Supercritical CO2 Fluid as Energy Efficient Lubricant Additive.. ACS applied materials & interfaces , 9 45 , 39549-39559 . http://doi.org/10.1021/acsami.7b10276
Gupta, M.., Jamil, Muhammad., Wang, Xiaojuan., Song, Q.., Liu, Zhanqiang., Mia, Mozammel., Hegab, H.., Khan, A.., Collado, Alberto García., Pruncu, C.., & Imran, G.. (2019). Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy. Materials , 12 . http://doi.org/10.3390/ma12172792
Ghaednia H, Jackson RL (2013) The effect of nanoparticles on the actual area of contact, friction, and wear. J Tribol 135(4):041603, https://doi.org/10.1115/1.4024297
Mr. Ravindra S. Surase , Dr. Ramkisan S. Pawar , Mrs. Supriya N. Bobade,(2016). Performance of Vegetable Oil Based Cutting Fluid in Machining of Steel by using MQL – A Review.
Rakesh Somashekaraiah, Suvin P S, Divya Prakash Gnanadhas, Satish Vasu Kailas, Dipshikha Chakravortty.(2017). Eco-Friendly, Non-Toxic Cutting Fluid for Sustainable Manufacturing and Machining Processes, https://doi.org/10.2474/trol.11.556
N Talib, EA Rahim(2016) Performance evaluation of chemically modified crude jatropha oil as a bio-based metalworking fluids for machining process, https://doi.org/10.1016/j.procir.2014.07.155
I. Shyhaa, , S. Gariania , M. Bhattia (2016) Investigation of cutting tools and working conditions effects when cutting Ti-6Al-4V using vegetable oil-based cutting fluids, https://doi.org/10.1016/j.proeng.2015.12.535
